• CODESYS
  • cULus

PB2200

Entry level box IPC based on Intel Bay Trail platform

  • UBIQUITY inside

The fanless box IPC family PB2200 is based on the Celeron J1900 2GHz quad core 64 bit processor of the Intel® Bay Trail™ System On Chip (SoC) platform. 


The "all in one" motherboard provides two Ethernet 10/100/1000Mbps ports, that support "Jumbo Frame" and "Wake on Lan" functionalities, one USB 3.0 port, two USB 2.0 ports, a serial RS232 interface, a DVI-I (DVI-D + VGA) video output and a SATA II CFast slot with external access, an mSATA connector for SATA II SSD, one SATA II connector for the installation of 2.5" HDD/ SSD, up to 8 GB RAM with one DDR3 SODIMM module and an internal connector for additional serial and USB interfaces.


PB2200 systems have an isolated 24 VDC power supply input and optionally an integrated UPS with external battery pack.


The systems are available in three versions, the SL with a reduced depth, the S0 with the possibility to install additional interfaces and the S1 with a PCI or PCIe x1 slot.


Also available in PAC version with integrated MicroUPS or, alternatively, the UPS with integrated electronics and external battery pack, both with 512kB MRAM (Magnetoresistive RAM) for saving the retentive variables.

Technical data

PROCESSOR

Intel® Celeron J1900 2.0Ghz (2.42Ghz Burst) 64 bit, 4 cores / 4 threads, 2MB L2 cache, soldered

VIDEO CONTROLLER

Intel® HD Graphics integrated in microprocessor, 688MHz Clock 854MHz Turbo, LVDS 8bit/colour digital interface

SYSTEM MEMORY - RAM

1GB or 2GB or 4GB or 8GB (1 x SODIMM DDR3 module)

MASS STORAGE

SL/S0/S1

1 bootable CFast SATA II slot onboard with external access 

1 x onboard connector for direct insertion of mSATA SSD SATA II

S0/S1

1 x bootable CFast SATA II slot on board with external access 

1 x onboard connector for 2,5“ SSD/HDD 24x7 SATA II with internal installation kit (HT2200 S0/S1)

LAN

2 x LAN 10/100/1000Mbps (RJ45 - 2 x Intel® I210)

USB

1 x USB 3.0 rear (Type-A) 

2 x USB 2.0 rear (Type-A)

SERIAL

1 x RS232 (DB9M)

VIDEO OUTPUT

1 x DVI-I (DVI-D + VGA with adapter)

ADD-ON INTERFACES 

(only for S0/S1)

Position A 

(max 1)

  • 1 x RS232/422/485 (DB15M)+ 1 x USB 2.0 (Type-A)

  • 1 x RS232/422/485 (DB15M) isolated + 1 x USB 2.0 (Type-A)

  • 2 x RS232 (DB9M) 

  • 2 x USB 2.0 (Type-A)

Position B 

(max 1)

  • 2 x USB 2.0 (Type-A)

  • 1 x LAN 10/100/1000Mbps (RJ45 - Intel® I210)

  • 1 x NETcore X fieldbus boards for EtherCAT, EtherNet IP, PROFINET, PROFIBUS, CANopen protocols

  • 1 x Wireless/Bluetooth/Modem adapter

EXPANSION SLOTS S1

1 x PCI

POWER SUPPLY INPUT

  • 24VDC (18÷32VDC) isolated with or without UPS (optional) with external battery pack

  • Kit for ATX mode power supply (optional)

O.S. CERTIFIED

Microsoft Windows 7 Pro/Ultimate 32/64 bit, 

Microsoft Windows Embedded Standard 7E/7P 32/64 bit, 
Microsoft Windows 8.1 Industry Pro 32/64 bit, 
Microsoft Windows 10 64 bit, 
Microsoft Windows 10 IoT Enterprise 2016 64 bit 

OPERATING TEMPERATURE

  • 0°C÷50°C

  • 0°C÷45°C with 24x7 HDD 

APPROVALS

CE, cULus LISTED (508)

CONTROL SOFTWARE

  • CODESYS SP RTE v3.x - 32/64 bit

  • CODESYS SP RTE + SoftMotion v3.x - 32/64 bit 

  • CODESYS SP RTE + SoftMotion + CNC v3.x - 32/64 bit

supported protocols

EtherCAT Master, EtherNet/IP Scanner, MODBUS TCP Master, MODBUS RTU Master, PROFIBUS Master/Slave*, CANopen Master*, Profinet IO Controller/Device*

REMOTE ASSISTANCE SW

ASEM UBIQUITY PRO

OS INSTALLED

  • Microsoft Windows Embedded Standard 7E/7P - 32/64 bit

  • Microsoft Windows 10 IoT Enterprise 2016 - 64 bit

PROCESSOR

Intel® Celeron J1900 quad core 2.00GHz (2.42Ghz Burst) a 64 bit, 4 cores / 4 threads, 2MB L2 cache, soldered

VIDEO CONTROLLER

Intel® HD Graphics integrated in microprocessor, 688MHz Clock 854MHz Turbo

SYSTEM MEMORY - RAM

2GB or 4GB or 8GB (SODIMM DDR3 module)

RETENTIVE MEMORY

512kB Magnetoresistive RAM

MASS STORAGE

SL/S0/S1

1 x bootable CFast SATA II slot on board with external access 

1 x onboard connector for direct insertion of mSATA SSD SATA II

S0/S1

1 x bootable CFast SATA II slot on board with external access 

1 x onboard connector for 2,5" SSD/HDD 24x7 SATA II with internal installation kit

LAN

2 x LAN 10/100/1000Mbps (RJ45 - 2 x Intel® I210)

USB

1 x USB 3.0 (Type-A) 

2 x USB 2.0 (Type-A) 

SERIAL

1 x DVI-I (DVI-D + VGA with adapter)

ADD-ON INTERFACES

(only for S0/S1)

Position A 

(max 1)

  • 1 x RS232/422/485 (DB15M)+ 1 x USB 2.0 (Type-A)

  • 1 x RS232/422/485 (DB15M) isolated + 1 x USB 2.0 (Type-A)

  • 2 x RS232 (DB9M)

  • 2 x USB 2.0 (Type-A)

Position B 

(max 1)

  • 1 x LAN 10/100/1000Mbps (Intel® I210)

  • 1 x NETcore fieldbus boards for PROFINET, PROFIBUS, CANopen protocols

EXPANSION SLOTS 

S1

1 x PCI

POWER SUPPLY INPUT

  • 24VDC (18÷32VDC) isolated with MicroUPS with supercapacitors

  • 24VDC (18÷32VDC) isolated with UPS with external battery pack 

OPERATING TEMPERATURE

0°C÷50°C

APPROVALS

CE, cULus LISTED (508)

Personal area

Login to your personal area to download your restricted contents. If you don’t have am ASEM account yet, register here.

Marketing materials
Drivers
Configurators

Contact us